Geogrid Plot Item

Description

Show the locations of geogrid elements as lines. The first few attributes of this plot item are contingent on the first attribute (Color By).

Attributes

Color By

../../../../../../../../../../_images/colorby_labelorcontour.png

Set either a “label” or a “contour” to be colored on the plot item.

Label/Value

../../../../../../../../../../_images/labelorvalueselect.png

Specify which label or value (as determined by the previous setting) to display in the plot item. The options for both are shown on the following table. Some options will require additional, dynamically-provided attributes in order to complete the selection; these are indicated with notations on the table.

Table 1: Selection Options for Label/Value
Label Valueᴰ
Applied Pressure Accelerationᶜ
Attach Conditionᵈ Applied Pressure
Collection ID Convergence
Coupling Yield Coupling Pore Pressure
Density Coupling Shear Stress
Extra of Elementᵉ Coupling Stress
Extra of Nodeᵉ Disp (Rel) of Link
Group of Elementˢ Displacement of Nodeᶜ
Group of Nodeˢ Effective Co.. Normal Stress
Material Type Extra of Elementᵉ
Propertyᵖ Extra of Nodeᵉ
Target of Link Force of Link
Thickness Gap 1
Type Gap 2
Uniform Maximum Fiber Stress
Yield State of Linkᵈ Maximum Member Stress
  Minimum Moment
  Ratio Local
  Ratio Target
  Resultantsʳ
  Stressʸ
  Total Couplings Normal Stress
  Velocityᶜ
Key:
ᶜA “Component” attribute follows
ᵉAn “Index” attribute follows
ᵈA “DOF” (degree of freedom) attribute follows
ᵖA “Property” attribute follows
ʳA “Resultants” (and other) attributes follows
ˢA “Slot” attribute follows
ʸA “Quantity” (and other) attributes follow
ᴰAll “Value” attributes supply a “DOF” attribute

Color-List/Contour

The attribute appearing in this position is either a Color-List or a Contour, depending on the “Color By” selection. Refer to the standard color-list control description and the standard contour control description for details.

Polygons

../../../../../../../../../../_images/polygonsabbr.png

Set properties of item facets. See the standard polygons control description for details.

Selected Only

selected only attribute

Set which elements are shown.

Selected Only: Specify (checked) that only selected plot item elements should be rendered.

Shrink

selected only attribute

Reduce rendering size.

Shrink: Reduce rendering size, to allow gaps between individual elements to be visible. Value must be between .1 and 1 (1 = no shrinking).

Marker

../../../../../../../../../../_images/marker.png

Control rendering of the markers denoting element position.

Marker: Select an option from the choices “None”, “Node”, or “Link”. Also a container for additional properties, based on the selection made here. A standard color attribute and scale attribute are provided when “Node” or “Link” are selected. The “Link” option also includes a standard line attribute.

System

../../../../../../../../../../_images/system.png

Set rendering of axes used to indicate local coordinate systems.

System: Select the coordinate system that is to be indicated by the axes, from the choices “None”, “Material”, Node”, “Element”, or “Surface”.

Additional controls provided after the initial selection is made will correspond to the controls available with the Axes plot item. See that topic for further details.

Map

../../../../../../../../../../_images/map01.png

Map the item to new model coordinates. See the standard map control description for details.

Def-Fac

../../../../../../../../../../_images/deffac.png

Set the deformation factor. See the standard def-fac control description for details.

Transparency

../../../../../../../../../../_images/transparency01.png

Set the transparency of the plot item. See the standard transparency control description for details.

../../../../../../../../../../_images/legend.png

Legend

Set item labeling in the plot legend. See the standard legend control description for details. Beneath Title, the Geogrid plot item also provides controls in Legend for Shrink, Color-List, Map, Def-Fac, and Count.