# building-blocks face add-controls command

Syntax

building-blocks face add-controls keyword <no-edges-cp> <range>

Add control points to faces. Control points are added on all faces in the current building blocks set if <range> is not supplied.

i

Add exactly i X i control points (grid) per each face (i must be a positive integer 0,2,3,…,20). Added control points will be evenly spaced. Also will add i CPs per each internal edge from the list of the faces. If i = 0 control points are removed.

no-edges-cp

Optional. Skip adding-removing CPs to-from edges.