# create command

Syntax

extrude edge create keyword

Primary keywords:

Creates an edge or a set of edges.

automatic

Automatically create edges from a background geometry present in a set. The background geometry usually represents an imported CAD geometry (e.g. a DXF or STL files).

by-points i1 i2 <keyword>

Create an edge between two points with ID i1 and ID i2.

group s1 <slot s2 >

Assign the created edge the group name s1 (in slot s2 if provided, in slot Default if not).

ratio f

Set the ratio f (a number between 0.1 and 10.1), which is used to distribute zone lengths along the edge (each zone will be f of the size of the zone preceding it). This setting automatically propagates across dependent edges of regular blocks while Ratio-Isolate is false.

ratio-isolate b

The option only applies to the edges which form regular (3- or 4-sided) blocks.

Set the flag to control ratio propagation. Ratio settings propagate when false (the default). If set true a ratio assignment on this edge will not propagate to dependent edges.

size i

Set the number of zones on the edge. This setting automatically propagates across dependent edges of regular blocks.

type keyword

Specify the curve type of the edge.

arc
polyline
simple

This is the default type (a line).

spline