Transparency

Transparency

../../../../../../../../../../../_images/transparency01.png

Set the transparency of the plot item. This setting is not available on 2D model objects.

Transparency: Apply transparency (checked) to the item. When on, transparency is set to a default value of 70 and is “locked.” When locked, the available range of transparency is constrained to 70 (lowest, somewhat transparent) to 100 (highest, completely invisible). To access the full range of transparency values (0-100), press the lock icon to “unlock” the transparency range; the icon changes accordingly ( tspunlock ).

Use the help button to get help with this specific attribute.

Note

Users should be cautioned that values lower than 70 tend to be imperceptibly “less” transparent and they may result in depth perspectives that can seem strange or incorrect.