Cable Plot Item

Description

Show the locations of cable elements as lines. The first few attributes of this plot item are contingent on the first attribute (Color By).

Attributes

Color By

../../../../../../../../../../_images/colorby_labelorcontour.png

Set either a “label” or a “contour” to be colored on the plot item.

Label/Value

../../../../../../../../../../_images/labelorvalueselect.png

Specify which label or value (as determined by the previous setting) to display in the plot item. The options for both are shown on the following table. Some options will require additional, dynamically-provided attributes in order to complete the selection; these are indicated with notations on the table.

Table 1: Selection Options for Label/Value

Label

Value

Label

Value

Attach Conditionᵈ

Accelerationᶜ

Collection ID

Axial Force

Density

Axial Stress

Extra of Elementᵉ

Convergence

Extra of Nodeᵉ

Disp (Rel) of Linkᵈ

Group of Elementˢ

Displacement of Nodeᶜ

Group of Nodeˢ

Extra of Elementᵉ

Propertyᵖ

Extra of Nodeᵉ

State of Element

Force in Elementᶜ

State of Grout

Force of Linkᵈ

Target of Link

Gap 1ᵈ

Uniform

Gap 2ᵈ

Yield State of Linkᵈ

Grout Confinement

Grout Displacement

Grout Stress

Ratio Local

Ratio Target

Velocityᶜ

Key:

ᶜA “Component” attribute follows

ᵉAn “Index” attribute follows

ᵈA “DOF” (degree of freedom) attribute follows

ᵖA “Property” attribute follows

ˢA “Slot” attribute follows

Color-List/Contour

The attribute appearing in this position is either a Color-List or a Contour, depending on the “Color By” selection. Refer to the standard color-list control description and the standard contour control description for details.

Line

../../../../../../../../../../_images/line01.png

Set line properties for the plot item. See the standard line control description for details.

Selected Only

selected only attribute

Set which elements are shown.

Selected Only: Specify (checked) that only selected plot item elements should be rendered.

Shrink

selected only attribute

Reduce rendering size.

Shrink: Reduce rendering size, to allow gaps between individual elements to be visible. Value must be between .1 and 1 (1 = no shrinking).

Marker

../../../../../../../../../../_images/marker.png

Control rendering of the markers denoting element position.

Marker: Select an option from the choices “None”, “Node”, or “Link”. Also a container for additional properties, based on the selection made here. A standard color attribute and scale attribute are provided when “Node” or “Link” are selected. The “Link” option also includes a standard line attribute.

System

../../../../../../../../../../_images/system.png

Set rendering of axes used to indicate local coordinate systems.

System: Select the coordinate system that is to be indicated by the axes, from the choices “None”, “Material”, Node”, “Element”, or “Surface”.

Additional controls provided after the initial selection is made will correspond to the controls available with the Axes plot item. See that topic for further details.

Map

../../../../../../../../../../_images/map01.png

Map the item to new model coordinates. See the standard map control description for details.

Def-Fac

../../../../../../../../../../_images/deffac.png

Set the deformation factor. See the standard def-fac control description for details.

Transparency

../../../../../../../../../../_images/transparency01.png

Set the transparency of the plot item. See the standard transparency control description for details.

../../../../../../../../../../_images/legend.png

Legend

Set item labeling in the plot legend. See the standard legend control description for details. Beneath Title, the Cable plot item also provides controls in Legend for Shrink, Labels, Map, and Def-Fac.