Commands

Operate on building-blocks. These are grouped below as block commands, face commands, edge commands, point commands, and set commands.

Building-Blocks Block commands

building-blocks block create
building-blocks block delete
building-blocks block export
building-blocks block group
building-blocks block hide
building-blocks block id
building-blocks block import
building-blocks block list
building-blocks block make-hex-only
building-blocks block multiplier
building-blocks block snapon
building-blocks block transform

Building-Blocks Face commands

building-blocks face add-controls
building-blocks face cycle
building-blocks face delete
building-blocks face drape
building-blocks face group
building-blocks face id
building-blocks face list
building-blocks face snapon
building-blocks face transform

Building-Blocks Edge commands

building-blocks edge add-controls
building-blocks edge delete
building-blocks edge drape
building-blocks edge factor
building-blocks edge group
building-blocks edge id
building-blocks edge list
building-blocks edge ratio
building-blocks edge ratio-isolate
building-blocks edge size
building-blocks edge snapon
building-blocks edge transform
building-blocks edge type

Building-Blocks Point commands

building-blocks point delete
building-blocks point drape
building-blocks point group
building-blocks point list
building-blocks point merge
building-blocks point move-to
building-blocks point snapon
building-blocks point transform

Building-Blocks Set commands

building-blocks set arrest-triangle
building-blocks set auto-tolerance
building-blocks set automatic-zone
building-blocks set break-angle
building-blocks set create
building-blocks set delete
building-blocks set export
building-blocks set geometry
building-blocks set import
building-blocks set list
building-blocks set select
building-blocks set tolerance
building-blocks set validate-all

• building-blocks block create command
• building-blocks block delete command
• building-blocks block export command
• building-blocks block group command
• building-blocks block hide command
• building-blocks block id command
• building-blocks block import command
• building-blocks block list command
• building-blocks block make-hex-only command
• building-blocks block multiplier command
• building-blocks block snapon id command
• building-blocks block transform command
• building-blocks edge add-controls command
• building-blocks edge delete command
• building-blocks edge drape command
• building-blocks edge factor command
• building-blocks edge group command
• building-blocks edge id command
• building-blocks edge list command
• building-blocks edge ratio command
• building-blocks edge ratio-isolate command
• building-blocks edge size command
• building-blocks edge snapon id command
• building-blocks edge transform command
• building-blocks edge type command
• building-blocks face add-controls command
• building-blocks face cycle command
• building-blocks face delete command
• building-blocks face drape command
• building-blocks face group command
• building-blocks face id command
• building-blocks face list command
• building-blocks face snapon id command
• building-blocks face transform command
• building-blocks point delete command
• building-blocks point drape command
• building-blocks point group command
• building-blocks point list command
• building-blocks point merge command
• building-blocks point move-to command
• building-blocks point snapon id command
• building-blocks point transform command
• building-blocks set arrest-triangle command
• building-blocks set automatic-zone command
• building-blocks set auto-tolerance command
• building-blocks set break-angle command
• building-blocks set create command
• building-blocks set delete command
• building-blocks set export command
• building-blocks set geometry command
• building-blocks set import command
• building-blocks set list command
• building-blocks set select command
• building-blocks set tolerance command
• building-blocks set validate-all command