zone gridpoint free command
Syntax
- zone gridpoint free keyword <range>
Primary keywords:
acceleration acceleration-x acceleration-y acceleration-z force-applied force-applied-x force-applied-y force-applied-z pore-pressure source temperature velocity velocity-x velocity-y velocity-z well
Free properties at gridpoints in the range. The list of properties here is identical to that for
zone gridpoint free, where they are also described.- acceleration
Free acceleration.
- acceleration-x
Free x-acceleration.
- acceleration-y
Free y-acceleration.
- acceleration-z
Free z-acceleration.
- force-applied
Free applied force.
- force-applied-x
Free applied force in the x-direction.
- force-applied-y
Free applied force in the y-direction.
- force-applied-z
Free applied force in the z-direction.
- pore-pressure
Free pore pressures.
- source
Frees the applied thermal source.
- temperature
Frees temperatures.
- velocity
Frees velocity.
- velocity-x
Frees x-velocity.
- velocity-y
Frees y-velocity.
- velocity-z
Frees z-velocity.
- well
Frees an applied fluid source.
| Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |