block contact join
command
Syntax
- block contact join b <range>
Join adjacent blocks within the given range. Joined blocks act as one block with a common centroid and volume calculated for all blocks joined together. A joined block group consists of one “master” block and one or more “slave” blocks. Use the
block list information
command to identify master and slave blocks in a block group. Note: only visible blocks are joined (seeblock hide
). This command is the same asblock join
except that contacts are used to identify the range.
Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Feb 25, 2024 |