block contact reset
command
Syntax
- block contact reset keyword <range>
Primary keywords:
Reset certain model variables.
- displacement
Reset all relative displacements (shear and normal) of contacts to zero. This has no effect on the model results, and is useful for identifying effects of incremental changes.
- energy
Reset joint energy terms to zero.
- pore-pressure
Reset joint pore pressure to zero.
- state
Reset all subcontact state indicators to elastic (no failure).
- stress
Reset all joint stresses (shear and normal) to zero.
Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Feb 25, 2024 |