block gridpoint trace
command
Syntax
- block gridpoint trace keyword
Trace position and velocity of a block gridpoint. See the c trace commands.
The positions and velocities of gridpoints on a block can be sampled and stored during a model run by using this command. The resulting path through space can be visualized with the program interface. Only one trace position may be created per
block gridpoint trace
command. Traces may be added at any time.A summary of all traces can be obtained by using the
trace list
command.The following keywords are available to specify which block gridpoint location is traced.
Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Feb 25, 2024 |