sel reinforcement create command

Syntax

sel reinforcement create keyword ... <range>

Primary keywords:

by-line    cid    group    property

Create a reinforcement element. When reinforcement is used with fully deformable blocks, the blocks must be discretized into zones before reinforcement locations are specified.

by-line v1 v2

Create the elements by defining a line from v1 to v2. A reinforcement element will be created at each intersection of the line and a joint.

cid i

Set the collection ID of the reinforcements. By default, a single collection ID is assigned to all reinforcement elements created with a single command.

group s1 <slot s2 >

Group created reinforcement elements in the group s1 (in the slot named s2, if supplied).

property i

Set the property number assigned to the reinforcement.