sel reinforcement property
command
Syntax
- sel reinforcement property i keyword ...
Primary keywords:
active-half-length rupture-axial-strain rupture-shear-strain rupture-tension-strain stiffness-axial stiffness-shear yield-shear-force yield-tension-force
Assign property values to reinforcement property \(i\).
- active-half-length f
Active half length.
- rupture-axial-strain f
Axial rupture strain. If axial strain exceeds this value, the element will no longer carry axial load.
- rupture-shear-strain f
Shear rupture strain. If shear strain exceeds this value, the element will no longer carry shear load.
- rupture-tension-strain f
Rupture tension strain.
- stiffness-axial f
Axial stiffness {F/L]
- stiffness-shear f
Shear stiffness [F/L]
- yield-shear-force f
Ultimate shear capacity [F]. The element cannot sustain shear forces greater than \(f\).
- yield-tension-force f
Ultimate axial capacity [F]. The element cannot sustain axial forces greater than \(f\).
Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Feb 25, 2024 |