Burger’s Model Properties

The properties of the Burger’s Model model are shown below for reference. More detailed information regarding these properties is presented here.

Note

Some properties are read only as stated below.

burger
bur_cnk f

\(C_{k_n}\) - Normal viscosity Kelvin section with default value 0.0.

bur_cnm f

\(C_{m_n}\) - Normal viscosity Maxwell section with default value 0.0.

bur_csk f

\(C_{k_s}\) - Shear viscosity Kelvin section with default value 0.0.

bur_csm f

\(C_{m_s}\) - Shear viscosity Maxwell section with default value 0.0.

fric f

\(f_s\) - sliding friction coefficient with default value 0.0.

bur_knk f

\(K_{k_n}\) - Normal stiffness Kelvin section with default value 0.0.

bur_knm f

\(K_{m_n}\) - Normal stiffness Maxwell section with default value 0.0.

bur_ksk f

\(K_{k_s}\) - Shear stiffness Kelvin section with default value 0.0.

bur_ksm f

\(K_{m_s}\) - Shear stiffness Maxwell section with default value 0.0.

bur_mode i

\(M_t\) - Normal force tensile mode with default value 0.

bur_force v

\(\mathbf{F}\) - Total force in units force with default value \(\mathbf{0}\).

This is a read-only property.

bur_slip b

\(s\) - slip state. This is a read only property.