data label modify
command
Syntax
- data label modify keyword ...
Modify an existing label. The keyword name must be used to identify the existing label to be modified.
- arrow b
Specifies whether the line connecting v1 to v2 ends with an arrowhead. This only applies if the end has been specified.
- end v2
If the end is specified as different from v1, then the label will include a line going from v1 to v2.
- name s
Assign a unique name to the label for later reference. If not specified then a name based on the internally assigned ID number is generated.
- position v1
Specify the label origin position.
Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Feb 25, 2024 |