struct.beam.load
Syntax
- v := struct.beam.load(p)
- struct.beam.load(p) := v
Get/set the uniform applied distributed load acting on the beam element in the local y- and z-directions.
The x-component of the return value will always be 0.0; on assignment it is ignored.
The optional argument idof can be used to specify whether only the value in the y- or z-direction will be returned/assigned.
Returns: v - the uniform applied distributed load acting on the beam element, or the y- or z-component Accepts: v - the uniform applied distributed load acting on the beam element, or the y- or z-component Arguments: p - a pointer to a beam element
Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Feb 25, 2024 |