type command
Syntax
- extrude mesh type keyword
Primary keywords:
Specify the type of mesh. By default, 3- and 4-sided regular blocks use structured mesh; this command specifies if unstructured mesh should be used for such blocks.
- mixed
Use structured mesh for 3- and 4-sided blocks and unstructured mesh for all other blocks. This is the default option.
- unstructured
Use unstructured mesh for all blocks. If this option is used and mesh mode (see
extrude mesh mode) is set to quad, triangular blocks will be meshed with quadrilaterals only (amount of zones per perimeter should be even).
| Was this helpful? ... | FLAC3D © 2019, Itasca | Updated: Mar 10, 2023 |