block zone nodal-mixed-discretization
command
Syntax
- block zone nodal-mixed-discretization b <keyword> <range>
Primary keywords:
Toggle nodal mixed discretization (NMD) for zones in the specified range. NMD is used for plasticity calculations when on. This provides a more accurate solution for tetrahedral meshes. The default is off. See Nodal Mixed Discretization in the 3DEC Theory section.
- volume-minimum f
Zones with volumes under value f will be excluded from nodal mixed discretization calculation. The default is 0.0.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Oct 31, 2024 |