block.thermal.line.point
Syntax
- v = block.thermal.line.point(in,ip)
- block.thermal.line.point(in,ip) = v
Get/set the point location for point \(ip\) of line \(in\) when using the analytical thermal solution. The input point \(ip\) is an integer from 1 to 1, where \(ip\) = 1 refers to the line start point and \(ip\) = 2 refers to the line end point See
block thermal
for details.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Nov 20, 2024 |