Contour

Contour

contours attribute

Specify settings for contouring.

Contour: A container for settings that control contouring options.

Ramp: Set the color ramp to use for rendering. The five options, in order shown in the select box, are: rainbow (blue to red), grayscale, blue-white-red, blue-cyan-white-yellow-red, green-white-red.

Maximum: Set the highest value (right end) of the color ramp automatically (auto checked) or with a specified value (auto unchecked). Values above Maximum are filled with the Above color.

Minimum: Set the lowest value (left end) of the color ramp automatically (auto checked) or with a specified value (auto unchecked). Values below Minimum are filled with the Below color.

Interval: Specify the number of color intervals used in when rendering; this value defaults to a number between 8-16 if auto is checked.

Log Scale: Specify that the color intervals are logarithmically spaced when checked.

Reversed: Reverse the color sequence of the color ramp when checked.

Below: Specify which color to use for values below the Minimum. The left end of the color ramp is used with auto checked. When unchecked, the color swatch control specifies the color.

Above: Specify which color to use for values above the Maximum. The right end of the color ramp is used with auto checked. When unchecked, the color swatch control specifies the color.