itasca.block.zonearray

Array interface for 3DEC zones.

Functions

itasca.block.zonearray.extra(slot: int) → array float{zone} or float{zone,3}.

Get the zone extra data in the given slot as an array. Extra variables accessed by array must be of type float or vec.

itasca.block.zonearray.fill_pos(data: array float{zone, 3}) → None.

Fill an existing array with the zone centroid location. The array must be the correct shape.

itasca.block.zonearray.fluid_prop(prop_name: str, fill_value=0.0) → array double{nzone}.

Return an array of the fluid property prop_name for each zone. If a property is not specified in a zone, fill_value is given for that zone. fill_value is an optional argument and defaults to zero.

itasca.block.zonearray.hostblock() → array int{nzone}.

Return an array of the host block ID.

itasca.block.zonearray.ids() → array int{zone}.

Get the zone ids as an array.

itasca.block.zonearray.in_group(group_name: str, slot='default') → array bool{nzone}.

Return block group membership as a Boolean array.

itasca.block.zonearray.mass() → array double{nzone}.

Return an array of the zone mass.

itasca.block.zonearray.pos() → array float{zone,3}.

Get a numpy array of the zone centroid location.

itasca.block.zonearray.pp() → array double{nzone}.

Return an array of the zone pore pressures.

itasca.block.zonearray.prop_scalar(prop_name: str, fill_value=0.0) → array double{nzone}.

Return an array of the property prop_name for each zone. Only properties of type double are supported by this function. If a property is not specified in a zone, fill_value is given for that zone. fill_value is an optional argument and defaults to zero.

itasca.block.zonearray.set_extra(slot: int, data: array float{zone} or float{zone, 3}) → None.

Set the zone extra data in the given slot with an array. Extra variables set by array must be of type float or vec.

itasca.block.zonearray.set_fluid_prop(prop_name: str, array) → None.

Set the fluid property prop_name of each zone. The input array should be shape (nzone,).

itasca.block.zonearray.set_group(membership: array bool{nzone}, group_name: str, slot="default") → None.

Set block group from an array. Where membership True set the corresponding block to be a member of group group_name in the given slot.

itasca.block.zonearray.set_prop_scalar(prop_name: str, array) → None.

Set the property prop_name of each zone. Only properties of type double or vec3 are supported. The input array should be shape (nzone,).

itasca.block.zonearray.set_stress(array double{nzone, 3, 3}) → None.

Set the zone stresses.

itasca.block.zonearray.set_stress_flat(array double{nzone, 6}) → None.

Set the zone stresses.

itasca.block.zonearray.set_thermal_prop(prop_name: str, array) → None.

Set the thermal property prop_name of each zone. The input array should be shape (nzone,).

itasca.block.zonearray.state() → array int{nzone}.

Return an array of the zone state.

itasca.block.zonearray.strain_inc() → array double{nzone,3,3}.

Get an array of the zone strain increment.

itasca.block.zonearray.strain_inc_flat() → array double{nzone,6}.

Get an array of the zone strain increment. The return value is a 2D array where the component ordering is xx,yy,zz,xy,yz,xz.

itasca.block.zonearray.strain_rate() → array double{nzone,3,3}.

Get an array of the zone strain rate.

itasca.block.zonearray.strain_rate_flat() → array double{nzone,6}.

Get an array of the zone strain rate. The return value is a 2D array where the component ordering is xx,yy,zz,xy,yz,xz.

itasca.block.zonearray.strain_rotation_inc() → array double{nzone,3,3}.

Get an array of the zone rotational increment tensor.

itasca.block.zonearray.strain_rotation_inc_flat() → array double{nzone,6}.

Get an array of the zone rotational increment tensor. The return value is a 2D array where the component ordering is xx,yy,zz,xy,yz,xz.

itasca.block.zonearray.strain_rotation_rate() → array double{nzone,3,3}.

Get an array of the zone rotational rate tensor.

itasca.block.zonearray.strain_rotation_rate_flat() → array double{nzone,6}.

Get an array of the zone rotational rate tensor. The return value is a 2D array where the component ordering is xx,yy,zz,xy,yz,xz.

itasca.block.zonearray.strain_shear_inc() → array double{nzone}.

Return an array of the zone shear strain increment .

itasca.block.zonearray.strain_shear_rate() → array double{nzone}.

Return an array of the zone shear strain rate.

itasca.block.zonearray.strain_vol_inc() → array double{nzone}.

Return an array of the zone volumetric strain increment.

itasca.block.zonearray.strain_vol_rate() → array double{nzone}.

Return an array of the zone volumetric strain rate.

itasca.block.zonearray.stress() → array double{nzone,3,3}.

Get an array of the zone stresses.

itasca.block.zonearray.stress_flat() → array double{nzone,6}.

Get an array of the zone stresses. The return value is a 2D array where the component ordering is xx,yy,zz,xy,yz,xz.

itasca.block.zonearray.thermal_prop(prop_name: str, fill_value=0.0) → array double{nzone}.

Return an array of the thermal property prop_name for each zone. If a property is not specified in a zone, fill_value is given for that zone. fill_value is an optional argument and defaults to zero.

itasca.block.zonearray.volume() → array double{nzone}.

Return an array of the zone volumes.