Pile

class itasca.structure.Pile

Objects of this type should not be created (instantiated) directly in Python. Use the module functions that return instances of this type.

area() → float.: Get the cross-section area of the pile element.

axial_yield() → float.: Get the axial tensile yield strength (force units) of the pile element.

component_id() → int.: Get the Pile component id.

connectivity(component: int) → bool.: Get the index of the node with component-ID id in the element. A ValueError exception is raised if no node in that element matches.

delete() → None.: Delete this structural element.

density() → float.: Get the density of this structural element.

extra(slot: int) → any.: Get the Pile extra data in the given slot.

force() → (vec3, vec3).: Get the force at each end of the pile in the element local system.

force_nodal() → (vec3, vec3, vec3, vec3).: Get the generalized nodal force acting at each end in the global system. The end 1 translational and rotational components are given first.

gap() → ((float, float, float, float), (float, float, float, float)).: Get the gap components in normal spring at each end of the pile element. The gap forms a rectangular shape in the pile cross-sectional plane, which is defined by the local yz-axes of the pile element node. The gap consists of four values denoting gap size in the positive and negative y- and z-directions. The components are the positive y-direction, negative y-direction, positive z-direction, and negative z-direction, respectively. The gap is always being tracked, but only affects behavior if the normal coupling spring gap-use flag function. The gap values for end 1 are given first.

group([slot: str or int]) → str.: Get the Pile group name in a given slot.

group_remove(group_name: str or int[, slot: str or int]) → bool.: Remove from the given group from all group slots of the Pile. One argument of type string, giving the group name, is required. The return value is a bool which is True if the group was removed from any slot, otherwise False.

groups() → {slot: group_name}.: Get a dictionary describing which groups this Pile is part of. The keys of the dictionary are the slot names and the values are the group names.

id() → int.: Get the Pile structural element id.

in_group(group_name: str or int[, slot: str or int]) → bool.: Test if the Pile is part of a given group. If the optional argument slot is given, only that slot is searched. Otherwise, all group slots are searched.

length() → float.: Get the length of the pile element.

load() -> None. () → vec3.: Get the uniform applied distributed load acting on the pile element in the local y- and z-directions. The x-component of the return value will always be 0.0.

local_system() → Tens3.: Get local coordinate system of this element as a 3x3 tensor.

mark() → bool.: Get the mark flag on the structural element. The structural element logic may modify this flag during command processing and cycling.

moi() → vec3.: Get the moment of inertia of the pile. This is defined as the moment of inertia with respect to the x-, y-, and z-axes.

moment() → (vec3, vec3).: Get the moment at each end of the pile in the element local system.

moment_plastic() → float.: Get the plastic moment capacity in the pile.

moment_plastic_y() → float.: Get the plastic moment capacity in Y in the pile.

moment_plastic_z() → float.: Get the plastic moment capacity in Z in the pile.

nodes() → tuple of Structural element node objects.: Get a tuple containing the structural element nodes attached to this elemment.

normal_cohesion() → float.: Get the normal coupling spring cohesive strength of the pile element.

normal_dir() → (vec3, vec3).: Get the global direction in which the pile element is being loaded by the coupling normal spring at each end.

normal_disp() → (float, float).: Get the displacement in the coupling normal spring at each end of the pile element. Sign convention for normal spring is positive/negative, indicating separation/overlap.

normal_friction() → float.: Get the normal coupling spring friction angle of the pile element.

normal_gap() → bool.: Get the normal coupling spring gap-use flag. True denotes gap is on, and False value denotes gap is off.

normal_state() → (int, int).: Get the yield state of the coupling normal spring at each end of the pile element. Return values 0, 1 and 2 denotes never yielded, now yielding, or yielded in the past, respectively.

normal_stiffness() → float.: Get the normal coupling spring stiffness of the pile element.

normal_stress() → (float, float).: Get the stress in the coupling normal spring at each end of the pile element. Sign convention for the normal spring is positive/negative, indicating separation/overlap.

perimeter() → float.: Get the exposed perimeter of the pile element.

poisson() → float.: Get the Poisson’s ratio of the pile element.

pos() → vec3.: Get the position vector of the element, defined as the element centroid.

rockbolt() → bool.: Get a boolean flag of the rockbolt. True denotes the rockbolt flag is on, and False denotes the rockbolt flag is off.

set_area(float) → None.: Set the cross-section area of the pile element.

set_axial_yield(float) → None.: Set the axial tensile yield strength (force units) of the pile element.

set_density(float) → None.: Set the density of this structural element.

set_extra(slot: int, value: any) → None.: Set the Pile extra data in the given slot.

set_group(group_name: str or int[, slot: str or int]) → None.: Set the Pile group name in a given slot.

set_load(vec3) → None.: Set the uniform applied distributed load acting on the pile element in the local y- and z-directions. The x-component is ignored on assignment.

set_mark(bool) → None.: Set the mark flag on the structural element. The structural element logic may modify this flag during command processing and cycling.

set_moi(vec3) → None.: Set the moment of inertia of the pile. This is defined as the moment of inertia with respect to the x-, y-, and z-axes.

set_moment_plastic(float) → None.: Set the plastic moment capacity in the pile.

set_moment_plastic_y(float) → None.: Set the plastic moment capacity in Y in the pile.

set_moment_plastic_z(float) → None.: Set the plastic moment capacity in Z in the pile.

set_normal_cohesion(float) → None.: Set the normal coupling spring cohesive strength of the pile element.

set_normal_friction(float) → None.: Set the normal coupling spring friction angle of the pile element.

set_normal_gap(bool) → None.: Set the normal coupling spring gap-use flag. True denotes gap is on, and False value denotes gap is off.

set_normal_stiffness(float) → None.: Set the normal coupling spring stiffness of the pile element.

set_perimeter(float) → None.: Set the exposed perimeter of the pile element.

set_poisson(float) → None.: Set the Poisson’s ratio of the pile element.

set_rockbolt(bool) → None.: Set a boolean flag of the rockbolt. True denotes the rockbolt flag is on, and False denotes the rockbolt flag is off.

set_shear_cohesion(float) → None.: Set the shear coupling spring cohesive strength of the pile element.

set_shear_flag(bool) → None.: Set the shear direction incremental confining stress flag. True denotes the flag is on, False denotes the flag is off.

set_shear_friction(float) → None.: Set the shear coupling spring friction angle of the pile element.

set_shear_stiffness(float) → None.: Set the shear coupling spring stiffness of the pile element.

set_slide(bool) → None.: Set a boolean flag of slide. True denotes the slide flag is on, and False denotes the slide flag is off.

set_slide_tol() → float.: Set the large-strain sliding tolerance of the pile element.

set_strain_failure(float) → None.: Set the tensile failure strain (non-dimensional) of the pile element.

set_table_cohesion(str) → None.: Set the shear direction cohesion strength table name for the pile element.

set_table_factor(str) → None.: Set the shear direction friction table name for the pile element.

set_table_friction(str) → None.: Set the shear direction incremental confining stress factor table name for the pile element.

set_thermal_expansion(float) → None.: Set the thermal-expansion coefficient for the structural element.

set_young(float) → None.: Set the Youngs modulus of the pile element.

shear_cohesion() → float.: Get the shear coupling spring cohesive strength of the pile element.

shear_dir() → (vec3, vec3).: Get the global direction in which the pile element is being loaded by the coupling shear spring at each end.

shear_disp() → (vec3, vec3).: Get the displacement in coupling shear spring at each end of the pile element. Sign convention for shear spring is positive/negative with respect to the average axial direction of pile.

shear_flag() → bool.: Get the shear direction incremental confining stress flag. True denotes the flag is on, False denotes the flag is off.

shear_friction() → float.: Get the shear coupling spring friction angle of the pile element.

shear_state() → None.: Get the yield state of the coupling shear spring at each end of the pile element. Return a values of 0, 1 and 2 denote never yielded, now yielding, or yielded in the past, respectively.

shear_stiffness() → float.: Get the shear coupling spring stiffness of the pile element.

shear_stress() → (float, float).: Get the stress in coupling shear spring at each end of the pile element. Sign convention for shear spring is positive/negative with respect to the average axial direction of pile.

slide() → bool.: Get a boolean flag of slide. True denotes the slide flag is on, and False denotes the slide flag is off.

slide_tol() → float.: Get the large-strain sliding tolerance of the pile element.

strain_failure() → float.: Get the tensile failure strain (non-dimensional) of the pile element.

stress_confining() → (float, float).: Get the confining stress at each end of the pile element. (Negative value is compression.) Stress acts in a plane perpendicular to the pile axis; confining stress is the average of the principal values in this plane.

table_cohesion() → str.: Get the shear direction cohesion strength table name for the pile element.

table_factor() → str.: Get the shear direction friction table name for the pile element.

table_friction() → str.: Get the shear direction incremental confining stress factor table name for the pile element.

thermal_expansion() → float.: Get the thermal-expansion coefficient for the structural element.

valid() → bool.: Returns True if this Pile is live.

volume() → float.: Get the volume of the pile element.

ydir() → vec3.: Get the y-axis of the pile element local system.

young() → float.: Get the Youngs modulus of the pile element.

⇄

⇐ Liner | Shell ⇒

Was this helpful? ...

Updated: Dec 14, 2024