plot legend command

Syntax

plot <s > legend keyword ...

Primary keywords:

active    copyright    heading    placement    position    size    step    time-model    time-real    title-customer    view-dip    view-info

set attributes of the plot legend. If a plot name s is not specified, the current view is assumed.

The available keywords are:

active b

turns the legend on and off (the default is on).

copyright :tok:`text`

the font used to indicate Itasca’s copyright, and code restriction information, if present. Note that only the color and size can be modified.

heading text

the font used to draw the heading (i.e., “FLAC3D 9.0”) Note that only the color and size can be modified.

placement keyword

legend location on the plot. The available options are:

floating

legend floats on top of the plot in an arbitrary position

left

legend on left side of plot (default)

right

legend on right side of plot

position ix iy

position of the legend if floating. Values are from 0 to 100, representing percentage of display size.

size iw ih

size of the legend, in percentage of screen width (iw) and height (ih). If legend placement is left or right, only iw is used. iw may vary from 5 to 50; ih may vary from 5 to 100.

step text

the font used to draw the step number

time-model text

the font used to draw the total time of any active process in the current model.

time-real text

the font used to draw the current date and time

title-customer text

the font used to draw the customer title at the bottom of the legend (if space is available)

view-dip b

if set to on, then the orientation output in the view-info part of the legend is given in terms of dip, dip-direction, roll, and distance. Otherwise the orientation is given by eye position and roll. The default is off.

view-info text

the font used to draw the current camera view information.