building-blocks set geometry command

Syntax

building-blocks set geometry keyword

Associate a geometry set with the current set. Geometric sets may be added, removed, or cleared for use with the current building blocks set.

Geometric sets may be used with the “snapon” and “drape” commands available for face, edge, and point objects (and in some cases block objects; see building-blocks block snapon or building-blocks face drape, for instance).

add s

Add a geometric set with name s to be associated with current building blocks set.

clear

Clear the list of geometric sets associated with the current building blocks set.

remove s

Remove the geometric set with name s from the list of geometric sets associated with the current building blocks set.