zone group command


zone group s <keyword> <range>

Add group name s to the zones in the range. Use of the group logic is described in Groups. This command may take the form zone group "slotname=groupname" — quotation marks required, — where slotname is the slot assignment and groupname is the group name.

A zone may belong to many groups in up to 128 different slots. The group range element can be used to select objects by group name. zone list group can be used to identify existing zone group names.

The following optional keywords are available.


Remove s from the zones. If a slot is not specified, the group name is removed from all slots where it is found.

slot s

Assign the group to the slot named s. If not supplied, a group name created by the command is assigned to the named Default.