zone gridpoint free command
Syntax
- zone gridpoint free keyword <range>
Primary keywords:
acceleration acceleration-x acceleration-y acceleration-z force-applied force-applied-x force-applied-y force-applied-z pore-pressure source temperature velocity velocity-x velocity-y velocity-z well
Free properties at gridpoints in the range. The list of properties here is identical to that for
zone gridpoint fix, where they are also described.- acceleration
Free acceleration.
- acceleration-x
Free \(x\)-acceleration.
- acceleration-y
Free \(y\)-acceleration.
- acceleration-z (3D ONLY)
Free \(z\)-acceleration.
- force-applied
Fix applied force.
- force-applied-x
Fix applied force in the x-direction.
- force-applied-y
Fix applied force in the y-direction.
- force-applied-z (3D ONLY)
Fix applied force in the z-direction.
- pore-pressure
Free pore pressures.
- source
Frees the applied thermal source.
- temperature
Frees temperatures.
- velocity
Frees velocity.
- velocity-x
Frees \(x\)-velocity.
- velocity-y
Frees \(y\)-velocity.
- velocity-z (3D ONLY)
Frees \(z\)-velocity.
- well
Frees an applied fluid source.
| Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Oct 31, 2024 |
