block face apply-remove command
Syntax
- block face apply-remove keyword <range>
Primary keywords:
load load-x load-y load-z stress convection flux westergaard
Remove an applied boundary condition for objects in the given range.
- load
Remove load boundary conditions in the \(x\)-, \(y\)-, and \(z\)-directions.
- load-x
Remove boundary condition in the \(x\)-direction.
- load-y
Remove boundary condition in the \(y\)-direction.
- load-z
Remove boundary condition in the \(z\)-direction.
- stress
Remove stress boundary condition.
- convection
Remove a convective boundary.
- flux
Remove a flux boundary.
- westergaard
Remove any previously defined added masses.
| Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |
