IsoSurface Plot Item
Description
Zone value data as isosurfaces.
Attributes
Value followed by varying stuff IsoValue Color-By followed by varying stuff Color-List Polygons Cut-Line Hide-Null Map Def-fac Transparency Legend
Value
![../../../../../../../../../../_images/value.png](../../../../../../../../../../_images/value.png)
Select the zone value to display. Additional attribute fields are supplied as needed; these are noted in the table below.
Accelerationᶜ |
Extraᵉᵘʷ |
Pore Pressureʷ |
Strength-Stress Ratioᵐ |
Conditionᵐ |
Fluid Biot Modulus |
Propertyᵖᵐ |
Target Force Ratio |
Convergence |
Fluid Bulk Modulus |
Saturation |
Temperature |
Densityᵐ |
Fluid Densityᵐ |
Strain Incrementʸ |
Thermal Propertyᵖᵐ |
Displacementᶜ |
Fluid Propertyᵖ |
Strain Rateʸ |
Unbalanced Forceᶜ |
Dynamic Timestep |
Local Force Ratio |
Stressᶻ |
Velocityᶜ |
Effective Stressᶻ |
Multiplier |
Key: |
ᴸAll values provide a “Log” attribute |
ᶜA “Component” attribute follows |
ᵉAn “Extra” attribute follows |
ᵐA “Method” attribute follows |
ᵖA “Property” attribute follows |
ᵘA “Type” attribute follows |
ʷA “Source” attribute follows |
ʸA “Quantity” and “Method” attribute follow |
ᶻA “Quantity”, “Stress”, and “Method” attribute follow |
IsoValue
![../../../../../../../../../../_images/isovalue.png](../../../../../../../../../../_images/isovalue.png)
Do XXXX.
IsoValue: If “Auto” is checked, automatically calculate xxxx. If unchecked, manually specify xxxxxx. Press the “execute” button if changing the manual setting in order to regenerate the plot after the change is specified.
Color-By
Density |
Multiplier |
Extraᵉ |
Propertyᵖ |
Fluid Density |
Stateᵗ |
Fluid Propertyᵖ |
Thermal Propertyᵖ |
Groupˢ |
Type |
Model |
Uniform |
Key: |
ᵉAn “Extra” attribute follows |
ᵖA “Property” attribute follows |
ˢA “Slot” attribute follows |
ᵗA “State By” attribute follows |
Color-List
![../../../../../../../../../../_images/colorlistabbr.png](../../../../../../../../../../_images/colorlistabbr.png)
Set properties of the line used for the item color-list. See the standard color-list control description for details.
Polygons
![../../../../../../../../../../_images/polygonsabbr.png](../../../../../../../../../../_images/polygonsabbr.png)
Set properties of item facets. See the standard polygons control description for details.
![../../../../../../../../../../_images/cutline01.png](../../../../../../../../../../_images/cutline01.png)
Cut-Line
Set properties of the line used for the item cutline. See the standard cut-line control description for details.
Hide-Null
![../../../../../../../../../../_images/hidenull.png](../../../../../../../../../../_images/hidenull.png)
Do not show null items in the plot. See the standard hide-null control description for details.
Map
![../../../../../../../../../../_images/map01.png](../../../../../../../../../../_images/map01.png)
Map the item to new model coordinates. See the standard map control description for details.
Def-fac
![../../../../../../../../../../_images/deffac.png](../../../../../../../../../../_images/deffac.png)
Set the deformation factor. See the standard def-fac control description for details.
Transparency
![../../../../../../../../../../_images/transparency01.png](../../../../../../../../../../_images/transparency01.png)
Set the transparency of the plot item. See the standard transparency control description for details.
Legend
![../../../../../../../../../../_images/legend.png](../../../../../../../../../../_images/legend.png)
Set item labeling in the plot legend. See the standard legend control description for details.
Beneath Title, the isosurface plot item also provides controls in Legend for Count, Color-List, Map, and Def-Fac.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |