Tensors (Zone) Plot Item
Description
Show zone tensor data for stress or strain. The first few attributes of this plot item are contingent on the first attribute (Type).
Attributes
Type
![../../../../../../../../../../_images/type01.png](../../../../../../../../../../_images/type01.png)
Select which zone tensor to plot.
Type: select from: “Stress”, “Strain Rate”, “Strain Increment”.
Color-By
Select the scalar value to pull from the tensor for display. Additional attribute fields are supplied as needed; these are noted in the table below.
Uniformⁿ |
Max Shear |
XY |
Orderˡ |
Determinant |
XZ |
Minimum |
2nd Dev Invariant |
YZ |
Intermediate |
XX |
Total Measure |
Maximum |
YY |
2nd Invariant |
Pressure |
ZZ |
Key: |
ᴬAll but “Uniform” and “Order” are supplied with a “Contour” attribute |
ⁿNo additional attribute field is supplied |
ˡA “Color-List” attribute is supplied |
Color-List/Contour
The attribute appearing in this position is either a Color-List or a Contour, depending on the “Color By” selection. Refer to the standard color-list control description and the standard contour control description for details.
Scale
![../../../../../../../../../../_images/scale02.png](../../../../../../../../../../_images/scale02.png)
Scale the item. See the standard scale control description for details.
![../../../../../../../../../../_images/line03.png](../../../../../../../../../../_images/line03.png)
Line
Set properties of the line used for the item outline. See the standard line control description for details.
Max Num.
![../../../../../../../../../../_images/maxnum01.png](../../../../../../../../../../_images/maxnum01.png)
Set the maximum number of items to render.
Max Num.: set the number.
Skip
![../../../../../../../../../../_images/skip01.png](../../../../../../../../../../_images/skip01.png)
Specify that every nᵗʰ zone should be skipped when generating tensors to render.
Skip: set the skip value.
Map
![../../../../../../../../../../_images/map01.png](../../../../../../../../../../_images/map01.png)
Map the item to new model coordinates. See the standard map control description for details.
Def-fac
![../../../../../../../../../../_images/deffac.png](../../../../../../../../../../_images/deffac.png)
Set the deformation factor. See the standard def-fac control description for details.
Transparency
![../../../../../../../../../../_images/transparency01.png](../../../../../../../../../../_images/transparency01.png)
Set the transparency of the plot item. See the standard transparency control description for details.
Legend
![../../../../../../../../../../_images/legend.png](../../../../../../../../../../_images/legend.png)
Set item labeling in the plot legend. See the standard legend control description for details.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |