Vectors (Structural Elements) Plot Item
Description
Show vector data for a selected structural element type.
Attributes
Structures Value Arrow Head By-Magnitude Contour Point Point to Base Scale Map Def-Fac Transparency Legend
Structures
![../../../../../../../../../../_images/structures.png](../../../../../../../../../../_images/structures.png)
Specify which structural elements to show.
Structures: Select one of: “All”, “Beam”, “Cable”, “Geogrid”, “Liner”, “Pile”, or “Shell”.
Value
![../../../../../../../../../../_images/value02.png](../../../../../../../../../../_images/value02.png)
Select which vector value to display.
Applied Force |
Coupling Moment |
Applied Moment |
Displacement |
Coupling Angle Displacement |
Unbalanced Force |
Coupling Displacement |
Unbalanced Moment |
Coupling Force |
Velocity |
Arrow Head
![../../../../../../../../../../_images/arrowhead02.png](../../../../../../../../../../_images/arrowhead02.png)
Control appearance of vector arrows.
Arrow Head: Include (checked) arrow head rendering on vectors.
Size: set the length and width of the arrow head, respectively.
Body: set the thickness of the arrow shaft.
Arrow Quality: set the number of “sides” to include in the arrow head (a sufficiently low number, e.g., “4”, will yield a “blockier” arrow head).
Quartics: use an alternative but faster (checked) rendering method for arrow heads than the default method. This may cause problems with some graphics cards.
By-Magnitude
![../../../../../../../../../../_images/bymagnitude.png](../../../../../../../../../../_images/bymagnitude.png)
Color vectors with the contour coloration or uniformly.
By-magnitude: Set (checked) coloring of vector arrows to match contour coloring (see Contour below). When unchecked, this attribute is followed by a Color attribute (see the standard color attribute desription for details) for assigning a uniform color to all vectors in the plot item.
Contour
Set the contour used to color the arrows. Refer to the standard contour control description for details.
Point
![../../../../../../../../../../_images/point.png](../../../../../../../../../../_images/point.png)
Set the size of the point used to indicate the vector’s point position. A Color attribute (see the standard color attribute description for details) is included when By-Magnitude is unchecked.
Point: set the size.
Point To Base
![../../../../../../../../../../_images/pointtobase01.png](../../../../../../../../../../_images/pointtobase01.png)
“Invert” the vector arrow so that the arrow head points at the point source of the vector.
Point to Base: set (checked) that the arrow head should point to the point source of the vector rather than emanate from it.
Scale
![../../../../../../../../../../_images/scale02.png](../../../../../../../../../../_images/scale02.png)
Scale the item. See the standard scale control description for details.
Map
![../../../../../../../../../../_images/map01.png](../../../../../../../../../../_images/map01.png)
Map the item to new model coordinates. See the standard map control description for details.
Def-fac
![../../../../../../../../../../_images/deffac.png](../../../../../../../../../../_images/deffac.png)
Set the deformation factor. See the standard def-fac control description for details.
Transparency
![../../../../../../../../../../_images/transparency01.png](../../../../../../../../../../_images/transparency01.png)
Set the transparency of the plot item. See the standard transparency control description for details.
Legend
![../../../../../../../../../../_images/legend.png](../../../../../../../../../../_images/legend.png)
Set item labeling in the plot legend. See the standard legend control description for details.
Beneath Title, the Vectors (Structural Elements) plot item also provides controls in Legend for Map, Def-Fac, Maximum, Scale, and Contour.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |