create
command
Syntax
- sketch block create keyword
-
Create block(s).
- at f1 f2 <keyword>
Create a block from the edges surrounding the point with the 2D coordinates f1 , f2.
- automatic <keyword> <range>
Create regular and/or irregular blocks from pre-existing edges within the range. Only edges which form closed polygons are used. If no range is provided, blocks will be created from all closed polygons present in the set.
- by-edges i1 i2 i3 ... <keyword>
Create a block from the edges with specified IDs i1 i2 i3 … The order of edges is irrelevant. For polygons with internal boundaries, only the edges forming the external boundary need to be specified.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |