wall.euler
Syntax
- v = wall.euler(w) (3D ONLY)
- wall.euler(w) = v (3D ONLY)
Get/set the wall orientation. The convention \(\big\{X,Y^{'},Z^{''}\big\}\) is used (i.e., the \(x\)-, \(y\)- and \(z\)-components correspond to the sequential rotations about the \(X\), \(Y^{'}\), and \(Z^{''}\) axes).
Note
The orientation is updated when orientation tracking is enabled (see the
model orientation-tracking
command).
Component Access
f = wall.euler
(w)->x
wall.euler
(w)->x
= f
- f = wall.euler.x(w) (3D ONLY)
- wall.euler.x(w) = f (3D ONLY)
Get/set the \(x\)-component of the wall orientation.
Access other vector components (\(y\), \(z\) (3D ONLY)) by substituting the component name where \(x\) appears above. See Member Access Operator for information about accessing members from data types using ->
.
Deprecated Component Access
Component access by adding an optional integer in the function arguments (e.g., f = wall.euler(w,3)
) is deprecated. It remains available but will not be supported in future versions. See Component Access with Integers in FISH on the Deprecated Commands and FISH page for details.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |