rblock trace
command
Syntax
- rblock trace <id id > id id2 | v
Add a rigid block particle trace. The positions and velocities of rigid blocks can be sampled and stored during a model run and the path through space can be visualized. The optional id directly following trace creates a particle trace with the specified ID. If not specified, then the next available particle trace ID is used. Following this, either 1) a position vector or 2) or an additional id keyword must be given to identify a specific rigid block. See the c trace commands for details regarding the manipulation of particle traces.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |