massflow mineblock import
command
Syntax
- massflow mineblock import s
Import a mineblock description. The description is contained in the file s.
MassFlow mineblock format specification
A MassFlow ASCII-format, tab-delimited mineblock file has with the following specifications:
Line 1 - Comment. This line is ignored
Line 2 - These are the table headers. The first 20 columns are mandatory and must go in the following order:
Easting, Northing, Elevation, CavePeriod, CavePeriodDyn, BlockID, SolidsDens, InSituPor, MaxPor, FricAngle, MeanDia, MeanDiaDyn, PriFragA, PriFragB, TenStrA, TenStrB, UCS, PercK1, PercK2, PercVMR.
See Block Model for the meaning of these parameters. The exact text string used to describe each column is not important.
From column 21, extra columns with information about mine block ore grades can be added. There is no limit to the number of extra columns that can be added. Information in these columns is available as labels in the mineblock plot item and through the FISH functions massflow.mineblock.ore.name
and massflow.mineblock.ore.value
.
Line 3 - This line is ignored
Line 4 onwards - Actual values for each of the column defined in Line 2
The code block below shows a portion of a MassFlow drawbell file. This example has 3 extra columns after the first 20 mandatory columns, for a total of 23 columns.
"Delimiter: r;"
Easting Northing Elevation CavePeriod CavePerioDyn BlockID SolidsDen InSituPor MaxPor FricAng MeanDia MeanDiaDyn PriFragA PriFragB TenStrA TenStrB UCS PercK1 PercK2 PercVMR KIMB3DG KIMB3F KIMB3B
0
1225 -1658 205 1 1 1 2.6 0 0.2 42 0.2 0.2 0.86 0.45 2.5 5 60000 11 4.5 0.5 0 0 0
1235 -1658 205 1 1 2 2.6 0 0.2 42 0.2 0.2 0.86 0.45 2.6 6 60000 11 4.5 0.5 0 0 0
1245 -1658 205 1 1 3 2.6 0 0.2 42 0.2 0.2 0.86 0.45 2.7 7 60000 11 4.5 0.5 0 0 0
...
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Aug 13, 2024 |