block.thermal.line.point

Syntax

v = block.thermal.line.point(in,ip)

block.thermal.line.point(in,ip) = v

Get/set the point location for point \(ip\) of line \(in\) when using the analytical thermal solution. The input point \(ip\) is an integer from 1 to 1, where \(ip\) = 1 refers to the line start point and \(ip\) = 2 refers to the line end point See block thermal for details.

Returns:

v - location of point \(ip\) of line \(in\)

Accepts:

v - location of point \(ip\) of line \(in\)