Geogrid Plot Item

Description

Show the locations of geogrid elements as lines. The first few attributes of this plot item are contingent on the first attribute (Color By).

Attributes

Color By Label/Value Contour/Color-List Polygons Selected Only Shrink Marker System Map Def-fac Transparency Legend

Color By

Set either a “label” or a “contour” to be colored on the plot item.

Label/Value

Specify which label or value (as determined by the previous setting) to display in the plot item. The options for both are shown on the following table. Some options will require additional, dynamically-provided attributes in order to complete the selection; these are indicated with notations on the table.

Table 1: Selection Options for Label/Value

Label	Valueᴰ
Applied Pressure	Accelerationᶜ
Attach Conditionᵈ	Applied Pressure
Collection ID	Convergence
Coupling Yield	Coupling Pore Pressure
Density	Coupling Shear Stress
Extra of Elementᵉ	Coupling Stress
Extra of Nodeᵉ	Disp (Rel) of Link
Group of Elementˢ	Displacement of Nodeᶜ
Group of Nodeˢ	Effective Co.. Normal Stress
Material Type	Extra of Elementᵉ
Propertyᵖ	Extra of Nodeᵉ
Target of Link	Force of Link
Thickness	Gap 1
Type	Gap 2
Uniform	Maximum Fiber Stress
Yield State of Linkᵈ	Maximum Member Stress
	Minimum Moment
	Ratio Local
	Ratio Target
	Resultantsʳ
	Stressʸ
	Total Couplings Normal Stress
	Velocityᶜ

Key:

ᶜA “Component” attribute follows

ᵉAn “Index” attribute follows

ᵈA “DOF” (degree of freedom) attribute follows

ᵖA “Property” attribute follows

ʳA “Resultants” (and other) attributes follows

ˢA “Slot” attribute follows

ʸA “Quantity” (and other) attributes follow

ᴰAll “Value” attributes supply a “DOF” attribute

Color-List/Contour

The attribute appearing in this position is either a Color-List or a Contour, depending on the “Color By” selection. Refer to the standard color-list control description and the standard contour control description for details.

Polygons

Set properties of item facets. See the standard polygons control description for details.

Selected Only

Set which elements are shown.

Selected Only: Specify (checked) that only selected plot item elements should be rendered.

Shrink

Reduce rendering size.

Shrink: Reduce rendering size, to allow gaps between individual elements to be visible. Value must be between .1 and 1 (1 = no shrinking).

Marker

Control rendering of the markers denoting element position.

Marker: Select an option from the choices “None”, “Node”, or “Link”. Also a container for additional properties, based on the selection made here. A standard color attribute and scale attribute are provided when “Node” or “Link” are selected. The “Link” option also includes a standard line attribute.

System

Set rendering of axes used to indicate local coordinate systems.

System: Select the coordinate system that is to be indicated by the axes, from the choices “None”, “Material”, Node”, “Element”, or “Surface”.

Additional controls provided after the initial selection is made will correspond to the controls available with the Axes plot item. See that topic for further details.

Map

Map the item to new model coordinates. See the standard map control description for details.

Def-Fac

Set the deformation factor. See the standard def-fac control description for details.

Transparency

Set the transparency of the plot item. See the standard transparency control description for details.

Legend

Set item labeling in the plot legend. See the standard legend control description for details. Beneath Title, the Geogrid plot item also provides controls in Legend for Shrink, Color-List, Map, Def-Fac, and Count.