Finding a License Number
The software provides multiple methods for finding the license number. There are variances between the codes, so not every method listed below will work in every case.
use the command
list security
(reported as “Serial Number: “)use the command
list keyinfo
(reported as “Serial Number: ” for physical keys only)use
(see License: field at top)
When a key is not found using one of the methods above, various possible outputs may occur:
a message indicating “no key found”
a message indicating the code is operating in demonstration mode
an error message in a dialog box
a “key not found” warning message
If using a physical key, in the event that the information cannot be obtained using any of the techniques above, the license number is also printed on the tag attached to the USB security key.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Dec 05, 2024 |