model history
command
Syntax
- model history <name s > keyword
-
Create a history of a model quantity. These quantities are mostly associated with a process.
The keyword name may be used to give the history a unique identifier for later reference. If name is not specified the history will be given a name automatically based on the internally assigned ID number.
The following keywords apply:
- creep keyword
Values associated with the creep process.
- cycles-total
The total number of cycles accumulated while this process is active.
- time-total
The total accumulated time while this process is active.
- damping
Value of global damping parameter (3DEC)
- dynamic keyword
Values associated with the dynamic process.
- cycles-total
The total number of cycles accumulated while this process is active.
- time-total
The total accumulated time while this process is active.
- energy keyword
Values associated with energy quantities in 3DEC.
- block-kinetic
The kinetic energy value in 3DEC.
- block-potential
The potential energy value in 3DEC.
- block-strain
The block strain in 3DEC.
- block-strain-excavated
The excavated block strain in 3DEC.
- block-strain-fill
The fill strain value in 3DEC.
- block-strain-plastic
The plastic strain value in 3DEC.
- block-volume-excavated
The excavated block volume in 3DEC.
- boundary-load
The boundary load in 3DEC.
- boundary-viscous
The boundary viscous force in 3DEC.
- damp-mass
The mass damping value in 3DEC.
- joint-friction
The joint friction value in 3DEC.
- joint-strain
The joint strain value in 3DEC.
- joint-strain-compressive
The joint compressive strain value in 3DEC.
- joint-strain-excavated
The joint strain excavated value in 3DEC.
- joint-strain-shear
The joint strain shear value in 3DEC.
- joint-strain-tensile
The joint strain tensile value in 3DEC.
- strain-excavated
The excavated strain value in 3DEC.
- strain-total
The total strain value in 3DEC (joints + zones).
- total-released
The total released energy value in 3DEC.
- total-stored
The stored energy value in 3DEC.
- fluid keyword
Values associated with the fluid process.
- cycles-total
The total number of cycles accumulated while this process is active.
- time-total
The total accumulated time while this process is active.
- mechanical keyword
Values associated with the mechanical process.
- convergence
The current mechanical value of convergence (see
model solve mechanical convergence
).
- cycle
The total number of mechanical cycles. (Deprecated; use
cycles-total
.)
- cycles
The number of cycles this process has taken in this
model solve
command.
- cycles-total
The total number of cycles accumulated while this process is active.
- energy keyword
The value of an energy partition in PFC.
- energy-adhesive
Adhesive energy stored contacts.
- energy-body
Body based work energy.
- energy-boundary
Wall based work energy.
- energy-damp
Local damping energy of bodies.
- energy-dashpot
Viscous dashpot energy stored in contacts.
- energy-kinetic
Kinetic energy of bodies.
- energy-pbstrain
Parallel bond strain energy stored in contacts.
- energy-rrslip
Rolling resistance slip energy stored in contacts.
- energy-rrstrain
Rolling resistance strain energy stored in contacts.
- energy-slip
Slip energy stored in contacts.
- energy-strain
Strain energy stored in contacts.
- ratio
The value of the ratio currently being used. See the definition of ratios in ref-equilibrium-. this and and next three need to be checked with DR closer to release!!!!
- ratio-average
The value of the average force ratio. See the definition of ratios in ref-equilibrium-.
- ratio-local
The value of the local force ratio. See the definition of ratios in ref-equilibrium-.
- ratio-maximum
The value of the maximum force ratio. See the definition of ratios in ref-equilibrium-.
- time
The accumulated time this process has done in this
model solve
command.
- time-total
The total accumulated time while this process is active.
- unbalanced-maximum
The maximum unbalanced force in any object.
- thermal
Values associated with the thermal process.
- cycles-total
The total number of cycles accumulated while this process is active.
- time-total
The total accumulated time while this process is active.
- timestep
The active timestep.
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Dec 03, 2024 |