program list
command
Syntax
- program list keyword
Primary keywords:
cycle-sequence directory fish information memory module named-range plugins principal version
Print program information.
Note
As with all program commands, use of the command word program is optional; program list and list are both valid.
Program information is printed to the screen. This information can be captured in a log file with the
program log-file
command.- cycle-sequence
List the doubles indicating the cycle point and names of the cycle entries in the cycle sequence. This information is useful when installing FISH callback events with the
fish callback
command. The following table lists the reserved cycle points:Cycle Point
Cycle Operation
-10
Validate the data structures
0
Determine a stable timestep
10
Equations of motion (or thermal bodies update)
15
Body coupling between processes
20
Increment time
30
Update the cell space
35
Create/delete contacts
40
Force-Displacement law (or thermal contact update)
42
Accumulate deterministic quantities
45
Contact coupling between processes
60
Second pass of equations of motion
70
Thermal calculations
80
Fluid calculations
- directory
List the current working directory and the application directory.
- fish <keyword> | s ...
List FISH information. By default all FISH symbols are listed. Alternatively specific FISH symbols can be listed.
- arrays
List all FISH arrays that have been created.
- basic
A basic list of all global FISH symbols.
- callbacks
List the FISH functions that have been added to be executed as callbacks (i.e., with the
fish callback
command).
- callback-list
List the callback events that have been registered. For instance, the solve_complete event is a registered callback event. [CS: is the base list of events shown anywhere??]
- code <s >
List the FISH pseudo-code generated after parsing FISH syntax. If a specific symbol s is provided, only the code for that specific function is listed. Otherwise the pseudo-code for all functions will be listed.
- contents s
For FISH values of an aggregate type (arrays, matrices, structures, maps, etc.) this will list the contents of the type in a structured way.
- intrinsics <s >
List the complete set of FISH intrinsics, both built-in and user-defined. If the string s is given, only those intrinsics that contain s in the name will be listed.
- memory-items
List of all memory objects allocated. See the FISH function
memory.create
.
- structures
List defined FISH structures, including their member names and values.
- symbols
List all FISH symbols.
- information
General program settings and status, including the customer title and the number of target threasds to use.
- memory
List the amount of memory that is actively being used.
- module
List the module DLLs that are loaded.
- named-range <s >
List the current named ranges. If a specific named range s is specified then the specifics of that range are listed.
- plugins
List the plugin DLLs that are loaded.
- principal fs1 fs2 fs3 keyword
This is a utility that determines the six components of a stress tensor given principal values (fs1 fs2 fs3 and directions. All three principal values must be given. Two directions are required:
- intermediate <keyword ...>
Specify the intermediate value. You may specify the intermediate direction with the following keywords:
- azimuth f
The direction being specified as the normal to a plane given by azimuth and plunge, in degrees.
- dip f
The direction being specified as the normal to a plane given by dip and dip-direction, in degrees.
- dip-direction f
The direction being specified as the normal to a plane given by dip and dip-direction, in degrees.
- normal v
The direction specified direction as a normal vector.
- plunge f
The direction being specified as the normal to a plane given by azimuth and plunge, in degrees.
- trend f
A synonym to azimuth
- minimum <keyword ...>
Specify the minimum value. You may specify the intermediate direction with the following keywords:
- azimuth f
The direction being specified as the normal to a plane given by azimuth and plunge, in degrees.
- dip f
The direction being specified as the normal to a plane given by dip and dip-direction, in degrees.
- dip-direction f
The direction being specified as the normal to a plane given by dip and dip-direction, in degrees.
- normal v
The direction specified direction as a normal vector.
- plunge f
The direction being specified as the normal to a plane given by azimuth and plunge, in degrees.
- trend f
A synonym to azimuth
- maximum <keyword ...>
Specify the maximum value. You may specify the intermediate direction with the following keywords:
- azimuth f
The direction being specified as the normal to a plane given by azimuth and plunge, in degrees.
- dip f
The direction being specified as the normal to a plane given by dip and dip-direction, in degrees.
- dip-direction f
The direction being specified as the normal to a plane given by dip and dip-direction, in degrees.
- normal v
The direction specified direction as a normal vector.
- plunge f
The direction being specified as the normal to a plane given by azimuth and plunge, in degrees.
- trend f
A synonym to azimuth
- version
List the full program version information. This information should be reported if a problem arises while using the code.
Usage Example
The following example illustrates how program list
can be used. The example shows the use of the principal keyword which requires that all three stress components be supplied, with two direction keywords supplied for each.
program list principal 3.3 2.2 1.1 intermediate dip 22.2 dip-direction 80 &
minimum normal 1,3,1 &
maximum azimuth 80 plunge 22.2
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Dec 03, 2024 |