structure cable list
command
Syntax
- structure cable list keyword <range>
Primary keywords:
apply force-axial force-node group grout information length property stress system-local yield
Lists properties and responses of cable elements in the range. If no keyword is given, the default output of the command is that associated with the information keyword.
- apply
axial tension that will be maintained during cycling
- force-axial
axial force in the cable (average of the two end forces)
- force-node <keyword>
generalized nodal forces (force and moment) acting on the element. These are the generalized forces exerted by the nodes on the element.
- local
express the values in the element coordinate system (the default)
- global
express the values in the global coordinate system
- group <slot s >
group assignment(s). If slot is specified, then list the group assignment, if any, in slot s.
- grout
information about the grout that is modeled as coupling springs that connect the cable to the target object (zones in FLAC3D and 3DEC, and particles in PFC3D): confinement, displacement, stress, yield state and average axial direction
- information
general element information: nodal connectivity, centroid, surface area, volume, and hide/select status
- length
length of the cable
- property keyword <scaled bscaled >
Scaled properties are returned if the scaled keyword (FLAC2D ONLY) is set to true (the default is false). If the property cannot be scaled, an error is emitted.
- cross-sectional-area f
cross-sectional area
- density f
mass density
- grout-cohesion f
grout cohesion per unit length
- grout-cohesion-table s
name of the table relating grout cohesion to relative shear displacement
- grout-friction f
grout friction angle
- grout-friction-table s
name of the table relating grout friction angle to relative shear displacement
- grout-perimeter f
grout exposed perimeter
- grout-stiffness f
grout stiffness per unit length
- slide b
large-strain sliding flag
- slide-tolerance f
large-strain sliding tolerance
- tensile-failure-strain f
tensile failure strain
- thermal-expansion f
thermal-expansion coefficient
- yield-compression f
compressive yield strength
- yield-tension f
tensile yield strength
- young f
Young’s modulus
- stress
axial stress in the cable (not to be confused with stress in the grout)
- system-local
element local coordinate system
- yield
yield state indicating whether or not the cable has yielded
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Dec 03, 2024 |