type
command
Syntax
- sketch mesh type keyword
Primary keywords:
Specify the type of mesh. By default, 3- and 4-sided regular blocks use structured mesh. This command specifies if unstructured mesh should be used for such blocks.
- mixed
Use structured mesh for 3- and 4-sided blocks and unstructured mesh for all other blocks. This is the default option.
- unstructured
Use unstructured mesh for all blocks. If this option is used and mesh mode (see
sketch mesh mode
) is set to quad, triangular blocks will be meshed with quadrilaterals only (the amount of zones per perimeter should be even).
Was this helpful? ... | Itasca Software © 2024, Itasca | Updated: Dec 05, 2024 |