rblock hide command

Syntax

rblock hide <keyword> <range>

Primary keywords:

undo

This command hides or un-hides all rigid blocks in the range. By default, commands that use a range filter will skip hidden objects. This can be overruled with the use-hidden keyword in the range specification.

The following keywords are available:

b

If a boolean type is specified, then if on it hides all rigid blocks in the range. If off it un-hides (or shows) all rigid blocks in the range, and the use-hidden keyword is applied to the range implicitly. on is the default if no keyword is given.

undo

This will reverse the operation of the last rblock hide command. A maximum undo stack of size 12 is retained.