massflow marker group command

Syntax

massflow marker group s <keyword> <range>

Primary keywords:

remove    slot

Assign group name s to markers in the range. Use of the group logic is described in group_manual.

Both the group and the slot can be encoded into the single string s. To do this use the composition ‘slotname=groupname’, where the name to the left of the equals sign will be the slot, and the name to the right will be the group.

remove

Remove group s from the marker. If no slot is specified the group assignment is removed from all slots it is found in.

slot s

Assign the group to the slot named s. The default slot is Default.