fracture.diameter
Syntax
- fdia = fracture.diameter(frac) (3D only)
- fracture.diameter(frac) = fdia (3D only)
Get/set the fracture diameter.
Note
The fracture must be disk-shaped (see
fracture.isdisk
). The modified fracture must fit within the model domain.Accepts: fdia - fracture diameter where fdia > 0 Returns: fdia - fracture diameter where fdia > 0 Arguments: frac - fracture pointer
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |