Template
-
class
itasca.template.
Template
- Objects of this type should not be created (instantiated) directly in Python. Use the module functions that return instances of this type.
-
dipdirmax
() → float. Get the template maximum dip direction in degrees.
-
dipdirmin
() → float. Get the template minimum dip direction in degrees.
-
dipmax
() → float. Get the template maximum dip in degrees.
-
dipmin
() → float. Get the template minimum dip in degrees.
-
id
() → int. Get the template id.
-
name
() → string. Get the template name.
-
norientparam
() → int. Get the template number of orientation parameters.
-
nposparam
() → int. Get the template number of position parameters.
-
nsizeparam
() → int. Get the template number of size parameters.
-
orientparam
(index) → string or float. Get a orientation parameter. The number of parameters can be assessed with the norientparam method.
-
orienttype
() → string. Get the template orientation type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped, fish, fisher (3D only) and dips (3D only).
-
posparam
(index) → string or float. Get a position parameter. The number of parameters can be assessed with the nposparam method.
-
postype
() → string. Get the template orientation type name. Acceptable values are uniform, gauss, bootstrapped and fish.
-
set_dipdirmax
(value: float) → None. Set the template maximum dip direction in degrees.
-
set_dipdirmin
(value: float) → None. Set the template minimum dip direction in degrees.
-
set_dipmax
(value: float) → None. Set the template maximum dip in degrees.
-
set_dipmin
(value: float) → None. Set the template minimum dip in degrees.
-
set_orientparam
(index, parameter) → None. Set an orientation parameter. The parameter can be either a string or a float depending on the parameter. The number of parameters can be assessed with the norientparam method.
-
set_orienttype
(value: string) → None. Set the template orientation type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped, fish, fisher (3D only) and dips (3D only).
-
set_posparam
(index, parameter) → None. Set a position parameter. The parameter can be either a string or a float depending on the parameter. The number of parameters can be assessed with the nposparam method.
-
set_postype
(value: string) → None. Set the template orientation type name. Acceptable values are uniform, gauss, bootstrapped and fish.
-
set_sizemax
(value: float) → None. Set the template maximum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.
-
set_sizemin
(value: float) → None. Set the template minimum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.
-
set_sizeparam
(index, parameter) → None. Set a size parameter. The parameter can be either a string or a float depending on the parameter. The number of parameters can be assessed with the nposparam method.
-
set_sizetype
(value: string) → None. Set the template size type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped and fish.
-
sizemax
() → float. Get the template maximum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.
-
sizemin
() → float. Get the template minimum size. The fracture size is defined as the {fracture length in 2D; disk diameter in 3D}.
-
sizeparam
(index) → string or float. Get a size parameter. The number of parameters can be assessed with the nsizeparam method.
-
sizetype
() → string. Get the template size type name. Acceptable values are uniform, gauss, powerlaw, bootstrapped and fish.
-
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |