plot legend command
Syntax
- plot <s > legend keyword ...
Primary keywords:
active copyright heading placement position size step time-model time-real title-customer view-dip view-info
set attributes of the plot legend. If a plot name s is not specified, the current view is assumed.
The available keywords are:
- copyright :tok:`text`
the font used to indicate Itasca’s copyright, and code restriction information, if present. Note that only the color can be modified.
- heading text
the font used to draw the heading (i.e., “FLACD 6.0”) Note that only the color can be modified.
- placement keyword
legend location on the plot. The available options are:
- floating
legend floats on top of the plot in an arbitrary position
- left
legend on left side of plot (default)
- right
legend on right side of plot
- position ix iy
position of the legend if floating. Values are from 0 to 100, representing percentage of display size.
- size iw ih
size of the legend, in percentage of screen width (iw) and height (ih). If legend placement is left or right, only iw is used. iw may vary from 5 to 50; ih may vary from 5 to 100.
- step text
the font used to draw the step number
- time-model text
the font used to draw the total time of any active process in the current model.
- time-real text
the font used to draw the current date and time
- title-customer text
the font used to draw the customer title at the bottom of the legend (if space is available)
- view-dip b
if set to on, then the orientation output in the view-info part of the legend is given in terms of dip, dip-direction, roll, and distance. Otherwise the orientation is given by eye position and roll. The default is off.
- view-info text
the font used to draw the current camera view information.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |