program customer-title-2 command
Syntax
- program customer-title-2 s
Set the second line of customer information. This line is displayed in the lower-left corner of the legend of all plot views by default.
Note
As with all program commands, use of the command word program is optional; program customer-title-2 and customer-title-2 are both valid.
If s contains spaces, then it must be enclosed by quotes, in which case any occurrence of a single quote or backslash character must be preceded by a backslash character.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |