- power-mohr
- bulk f
elastic bulk modulus, K
- cohesion f
cohesion, c
- constant-1 f
power-law constant, A1
- constant-2 f
power-law constant, A2
- dilation f
dilation angle, ψ
- exponent-1 f
power-law exponent, n1
- exponent-2 f
power-law exponent, n2
- friction f
angle of internal friction, ϕ
- poisson f
Poisson’s ratio, v
- shear f
elastic shear modulus, G
- stress-reference-1 f
reference stress, \(\sigma^{ref}_1\)
- stress-reference-2 f
reference stress, \(\sigma^{ref}_2\)
- young f
Young’s modulus, E
- flag-brittle b
[advanced] If true, the tension limit is set to 0 in the event of tensile failure. The default is false.
- Notes:
- Only one of the two options is required to define the elasticity: bulk modulus K and shear modulus G, or Young’s modulus E and Poisson’s ratio v.
- The creep behavior is triggered by deviatoric stress, while the volumetric behavior does not consider creep.
- The tension cut-off is σt = min (σt, c/tanϕ).
Footnotes
Advanced properties have default values and do not require specification for simpler applications of the model.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |