building-blocks point transform command
Syntax
- building-blocks point transform <origin v_o > keyword <control-point b > <range>
-
Transform points. If <
range
> is not specified all points are transformed.For those options that require an origin (rotate, reflect, and scale) the optional origin may be supplied to specify the origin for the operation.
The <control-point b> option for the edges with control points indicates whether control-points on an edge should move if only one of the points of that edge is moved. For the faces with control points the option indicates where control-points of a face should move if not all of the face points are moved. The default is true. This option has no effect with reflect keyword.
- reflect keyword
Make a reflection transformation about a plane.
- rotate direction v angle f
performs rotation by angle f, in degrees, using rotation axes that goes through the coordinate origin in the direction v.
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |