structure beam list command
Syntax
- structure beam list keyword
Primary keywords:
apply force-end group information length force-node property system-local
List information about beam elements.
- apply
list applied distributed loads
- force-end
forces exerted by the end nodes on the element, in element local coordinates
- group <slot s >
list group to which the element belongs. By default, lists all slots with group assignments. If the slot keyword is used, only the contents of that slot is listed.
- information
lists general element information, including id and component-id numbers, connected nodes, centroids, surface area, volume, and the hide and select status
- length
list length of the element
- force-node keyword
list nodal forces. By default, components are displayed in terms of the element local coordinate systems. These are the forces exerted by the nodes on the element.
- local
list forces in terms of the element local coordinate system (the default)
- global
list forces in terms of the global coordinate system
- property keyword
list element property information
- density
density, ρ
- youngs
Young’s modulus, E
- poisson
Poisson’s ratio, ν
- plastic-moment
plastic moment, MP
- thermal-expansion
thermal expansion coefficient, αt
- cross-sectional-area
cross-sectional area, A
- moi-y
second moment with respect to local y-axis, Iy
- moi-z
second moment with respect to local z-axis, Iz
- moi-polar
polar moment of inertia, J
- direction-y
y-axis vector components
- system-local
the element local coordinate system
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |