structure cable property command
Syntax
- structure cable property keyword
Primary keywords:
density young grout-cohesion grout-friction grout-stiffness grout-perimeter plastic-moment slide slide-tolerance thermal-expansion cross-sectional-area yield-compression yield-tension
Assigns a property to elements in the range. The following properties are available:
- density f
density (needed if dynamic mode or gravity are active), ρ
- young f
Young’s modulus, E
- grout-cohesion , f
grout cohesive strength, cg
- grout-friction f
grout friction angle, φg
- grout-stiffness f
grout stiffness, kg
- grout-perimeter f
grout exposed perimeter, pg
- plastic-moment f
plastic moment, MP
- slide b
sliding flag
- slide-tolerance f
sliding tolerance
- thermal-expansion f
thermal expansion coefficient, αt
- cross-sectional-area f
cross-sectional area, A
- yield-compression f
compressive yield strength, Fc
- yield-tension f
tensile yield strength, Ft
Was this helpful? ... | PFC 6.0 © 2019, Itasca | Updated: Nov 19, 2021 |